Products
Online grain, air and humidity measurement across flat warehouses, stacks, vertical silos and shallow circular silos.
12 products. Specifications are taken from existing product documentation; contract technical specifications govern.
Reads and stores grain temperatures on site and transfers them to the system software over USB. Reads a single cable or a single point, reads air temperature and humidity, locates faulty points on a temperature cable, and diagnoses communication-bus faults. Its interfaces track the monitoring system, so it upgrades with it.
Built on an imported HUMIREL HS1101 element for harsh environments. Outputs a digital signal and shares one communication line with the temperature cable. Dual protection — a dust cap in service to keep dust and insects out, and a fumigation cap during treatment to prevent phosphine corrosion.
Online measurement and display for finished-grain stores, archive rooms and equipment warehouses.
Uses a Swiss Sensirion digital humidity element with a single-bus high-accuracy temperature sensor and a low-power processor. Used in pharmaceutical plants, vegetable stores, production areas, warehouses and libraries.
Designed to China's State Archives Administration requirements for archive temperature and humidity management. Monitors store conditions in real time and drives the equipment that corrects them. Extendable to fire, intrusion, dust, pest, mould and light protection, with networking and remote access.
The actuating half of the environmental control pair: it acts on the equipment as instructed by the recording controller. Used in archives, pharmaceutical and tobacco stores, laboratories and other controlled stores.
For flat warehouses and stacks, 2–5 measuring points per cable (configurable), working with the workstation or the handheld unit. Single-shot moulded for corrosion resistance, smooth-surfaced for easy routing, copper conductor for stable transmission.
For flat warehouses and stacks, 2–5 points per cable. Two-shot moulded so it can be customised, sensors are removable for service, and a steel-wire core gives it tensile strength.
Each T-connection joins 2–6 cables and can be combined into runs of different lengths. No inline splices between cables, so runs are stable, a single cable can be replaced without breaking the chain, and spare-part cost drops because no transmission line is wasted.
For vertical and shallow circular silos. Steel wires arranged around the circumference resist crushing and static; a smooth, small cross-section reduces drag in the grain; high tensile and torsional strength.
For vertical and shallow circular silos. Simpler to manufacture and lower cost, with several hanging arrangements and an adjustable tensile specification.
Resistive sensing for vertical and shallow circular silos, with lightning and static protection. Sensors are permanently sealed against fumigant, and one failed point does not take the cable out of service.
Send us your storage type, capacity and existing equipment. Our engineers will come back with a system configuration and an outline proposal.
